SB-IRM-UN
$ 77.50
Built in 10 Macros, each can sequence up to 50 IR codes with different Time delay between IR Codes to transmit between 0 seconds up to 30 minutes
Description
Built in 10 Macros, each can sequence up to 50 IR codes with different Time delay between IR Codes to transmit between 0 seconds up to 30 minutes. Universal Infra Red code Emitter with built in dual Range 2A current sensor and Macro cyclic function. The innovative current sensor Idea to check if the up to 2 electronic equipments are running or any is turned off to prevent sending Power Toggling IR code. Each module Can save up to 255 IR codes then can be used for Home theater equipment, Multi Media systems control, IR Remote motorized Curtains Split AC control, and several other IR Controlled devices. Ready trigger Using single on command..
**Added function: Bigger screw terminals, Broadcast button, and mini USB firmware upgrade port.
Control Compatibility:
• all standard universal IR enabled equipment (that can be controlled using IR signals)
Connection Port:
WHY G4 (GENERATION-4) IS BETTER? 4Z, AND IR EMITTER (W/CURRENT SENSOR)
4Z/IR Modules (Features compared)
Old Smart-BUS
New S-BUS G4
Upgrading without opening the Device
Not Possible
By Mini USB
Broadcast Button for addressing while Networked
Not Possible
Available
Big Easy Screw Terminals to connect Cables
Too Small
Bigger Size
PCB Electronics Design Complexity
Random
Organized
Updated Channel Operation status on DLP and SW if Manually Changed with 2way switch function
Not Available
Available
Easy Twist to Open Design
Not Possible
Available
Easy Backup and Restore using Configuration SW
Not Available
Available
Work on Both BUS and Cloud Technology
Not Possible
Possible
Genuine Patent and Brand Embedded into all Parts and Plastics
Not Available
Available
Genuine Product Barcode GTIN, and Holographic Label Distinguisher
Not Available
Available
All Other Standard Smart-BUS Advanced Automation Features
Included
Included
TECHNICAL DATA:
Macro Function
Built in multi systems Macro
ability (10 Macros each accept
50 IR commands), Cyclic Start
point ability to reset macro
even if changed manually. (e,g.
Watch DVD, Listen to Music,
Watch TV)
Universal Coded
IR Emitter can save up to 255
universal unique IR codes
Current Sensor
Accept 2A Maximum Load, with
0-255 Range to detect if 2
equipment is operational or off,
like TV, DVD, Set top Box ++
Control IO
1 x Advanced RS485 S-BUS
serial port links screw link type
Upgrade
1 x mini USB port (to connect to
special programming board)
User Controls
• LED status indicator/channel
• Diagnostic LED+ BROADCAST
Programming
Advanced Software Configuration
& Programming. Single On
Trigger command ready per
macro.
Compliance
CE Mark EMC, Rohs
Operation Protection
• BUS Rv. Polarity Protection
• BUS Short Circuit Protection
Applications
The IR Emitter has successfully
proved its ability in control of
many 3rd party IR controlled
systems like: HVAC, Curtains,
Drapes, TV’s, DVD’s, Set Top
Sat Boxes, Stereo equipment,
AV receivers, Projectors…etc.
IR code learning
Must use SBIRL-kit “IR-learner”
to encode all devices IR codes
needed.
SBUS DC Supply
24VDC with flexible tolerance
between 8-36VDC. Flexible
ability to add power supply as
to be needed any where
Power consumption: 15mA
Installation
• universal Mount Ready
Operating Environment
0º to 45ºC ambient temperature
20% to 93% RH
Enclosure material
Polycarbonate,
Dimensions & Weight
W 46mm x L 46mm x H 16mm
Packed weight 0.06 kg
Q. How many IR codes Can the IR emitter save?
A. 255
Q. up to what range can IR emitter send IR signal?
A. up to 6 meters
Q. What is the Load designed to be read accurately by the current sensor that is built-in the IR emitter?
A. up to 2Amp the reading is accurate. Usually all electronics like TV, DVD ++ are below this thresh hold.
Q. Can the IR emitter perform Macro functions?
A. if you have logic module installed, then any IR-emitter can perform the Macro function.
Documents
• Datasheet IR Macro
• Configuration Manual for SMART IR Serials
• Installation Manual
• Programming Manual
• Control Split AC from DDP using IR Emitter / 9in1 Sensor
Softwares and Firmwares
• Smart Cloud Software Versions
• IR Macro Firmware
• Upgrade Kit Driver (Win 7 & XP)
• JTAG Firmware Upgrade
Applications
The IR Emitter has successfully proved its ability in control of many 3rd party IR controlled systems like: HVAC, Curtains, Drapes, TV’s, DVD’s, Set Top Sat Boxes, Stereo equipment, AV receivers, Projectors…etc.
Configuration Manual for SMART IR Serials V1.0.1
